How to replace door window?
Thread Starter
Registered User
Joined: Apr 2007
Posts: 468
Likes: 1
From: Ocala, FL
How to replace door window?
I tried to search, but couldnt find a DIY thread. I scratched it pretty bad while removing tint, i bought a used glass from the junkyard and plan on installing it later
Registered User
Joined: Dec 2005
Posts: 78
Likes: 0
It's not too hard. I replaced the whole door and swapped out the glass.
You have to take off the panel. Then there are about 3 places where the glass is attatched, the front, middle and back. It's really pretty easy.
If you get the shop manual it will show you everything. You can get it on ebay for less than $5.
JB
You have to take off the panel. Then there are about 3 places where the glass is attatched, the front, middle and back. It's really pretty easy.
If you get the shop manual it will show you everything. You can get it on ebay for less than $5.
JB
Registered User
Joined: Jan 2006
Posts: 5,660
Likes: 2
From: Los Angeles, Buena Park
Originally Posted by 00CivicSi,Jun 21 2007, 09:54 PM
Way to contribute. 
i agree with Avionics86
If you did not remove the old glass yet mark your settings with a marker before you remove everything.
make sure its align i suggest you start pulling the side panel just a start, so you know what your up to...
good luck...
oh btw make sure its align otherwise its going to make some crazy noise...
Thread
Thread Starter
Forum
Replies
Last Post
