I don't want to damage anything on car so i am asking. How do you take the lens off the top interior lights to get to the bulbs? The trunk one was a no brainer of course... but this one is kinda tricky and do not want to risk scratching anything or even cracking that plastic lens. Thanks guys!

 

The lens is a pressure fit. It has to be pried off. Use a narrow screw driver with masking tape on the end (to protect the lens).

 

There are 2 small indentations on the edge of the lens. Use a small screwdriver in them to pop the lens out.

 

thanks, ill try it now... and if i break it... its your a$$...............J/K

 

Probably too late now, but pry from the windshield side with a short screwdriver, in case you scratch the lens or the trim, it wont be as noticeable.