Stock Engine Mount Spacing

Reply Subscribe

Thread Tools

Aug 29, 2018 | 01:56 AM

Jwilly571

Thread Starter

Registered User

Joined: Aug 2018

Posts: 6

Likes: 0

Stock Engine Mount Spacing

Hey everyone, longtime lurker new to the forums. Does anyone know, or have their engine out of an AP1 and able to measure, the distance between the stock engine mounts? Thanks

Aug 29, 2018 | 03:47 AM

Slowcrash_101

Joined: Jul 2013

Posts: 5,731

Likes: 632

Why take the engine out to measure that? You could just measure the distance of the mount studs as theyre bolted to the subframe.

Aug 29, 2018 | 03:53 AM

Jwilly571

Thread Starter

Registered User

Joined: Aug 2018

Posts: 6

Likes: 0

I just have the engine. Building a frame. Stud bolt distances for the mounts would be pefect as well though. Thanks

Aug 29, 2018 | 06:35 AM

Jwilly571

Thread Starter

Registered User

Joined: Aug 2018

Posts: 6

Likes: 0

Across the subframe pls. Using stock mounts and making brackets. They will eventually be upgraded but want to eliminate some trial and error. Thanks

Aug 30, 2018 | 05:18 AM

Jwilly571

Thread Starter

Registered User

Joined: Aug 2018

Posts: 6

Likes: 0

Bump. Looking for the distance between engine mount bolts on AP1 subframe pls.

Aug 31, 2018 | 05:18 AM

Billman250

Moderator

Joined: Jul 2002

Posts: 22,384

Likes: 1,835

From: Long Island, New York

The subframe holes are not only doubled, they are angled. You need to be very specific on what you need, I can get it.

Aug 31, 2018 | 05:24 AM

Jwilly571

Thread Starter

Registered User

Joined: Aug 2018

Posts: 6

Likes: 0

Just across. Back hole across to back hole and front across to front. If you want to do diagonal as well that would work but I believe they are at 45 degrees. Thanks a bunch