Hi guys,
I am about to place an order for a set of advan rz-2's (17x9+63) I did a google search on that wheel and size to try and tell how much concave the face of the wheel will have but i can't seem to find one with a decent angle. In my search i did notice that an Advan RS-2 in that size and offset do have a little bit of concave on the face which is what i want. So before i go ahead and purchase the wheels is their anyone on here who are able to confirm that the rz-2's share similar concave to the rs-2?

 

They're pretty damn concave for a wheel that fits on our car



Rears are the +63. This is all I have on my phone bit I'll snap more for you tomorrow am

 

That looks perfect, I assume that you rolled fenders and moved tab? How much are you lowered?

 

thats a +63 in the rear?? that looks along the lines of a 45 ish offset ! I never knew they were that concave at 63. What are the size of the fronts? Im guessing 225/40 with 245/40 in the rear?

 

I was looking at the pictures and also thinking that those can't be a +63 rear...

 

The wheels on the blue s2000 are not RZIIs. Those are the original RZs. So the design is different. Though I am with some people in this thread. Those do not look like +63 offset. The RZIIs are flatter. For some reason S2ki is being funky. So it wont allow for me to insert a pic. It will show you the face of the wheel.

http://www.fujicorporation.com/eng/shop/img/reviewwindow.aspx?user_review=39250&detail=1

Also, Advan never made a 17x9.0 +63 RZ from my knowledge.

 

Thanks for getting back to me; I bought the wheels, and they should be here towards the end of march. They were nice enough to send me a pic of them too which would answer my question, so to anyone in future wondering what the 17x9+63 off-set looks like with the faces / concave here you go….

 

They have very similar concave looks in the high offsets in comparison to the RSII.