Who would you recommend to install 4:57s in Bham?
#3
That would have been my recomendation.
#6
Former Moderator
The differentials are very time consuming to set-up, involving multiple mock-up assemblies to check the clearances. You also have to use a new crush sleeve and pinion seal everytime you check the pinion depth. The last diff I rebuilt took 3 pinion seals and crush washers to set correctly. I also reccomend replacing axles seals, both carrier and pinion bearings at the same time. The bearings and seals run around $300, plus the labor to assemble. I've been charging $300 for assembly.
I have to build them in my spare time, which is running a little thin.
If you bring be a diff, the turn-around could be as little as a week, maybe 2 weeks if additional pinion shims need to be ordered.
I have to build them in my spare time, which is running a little thin.
If you bring be a diff, the turn-around could be as little as a week, maybe 2 weeks if additional pinion shims need to be ordered.
Thread
Thread Starter
Forum
Replies
Last Post
suprmonky73
Delaware Valley S2000 Members
26
07-29-2009 12:50 PM