Has anybody installed the ASM radiator overflow tank? The Japanese instructions seem to say to cut the hose by 1.5cm but I can't see why that's necessary. Any ideas?

 

I've bought 2 ASM radiator/oil catch cans from Go Tuning, no instructions with either one. You shouldn't have to do anything to install the radiator catch can, just put the red sticker/install red zip tie in the middle of the level gauge(where the coolant level should be on a cold engine).

 

ASM Bump Steer Bracket - S2000 ASM-AP100212. This has been modified to fit Spoon Steering Rack Rigid Bushing Kit 53685-AP1-000






ASM GT Front Tower Bar - S2000 ASM-AP100117 / ASM GT Front Tower Bar - Short S2000 ASM-AP100154. Short X brace is on the right.









ASM Street Oil Catch Tank - S2000 ASM-AP100115



Recaro ASM Limited II Seat Side Protector Red Stitch


Recaro ASM Limited II Seat Back Protector


ASM Shoulder Cover Ruby Alcantara


ASM I.S. Design Air Intake Duct - S2000 ASM-AP100181

 

ASM SAMCO intake hose kit - Black ASM-AP100203

 

Jack with regards to the ASM bumpsteer kit, isn't it the same thickness as the Spoon one? Could the Spoon bumpsteer/solid bushing kit be used with the short ASM Bar?

 

No, Spoon is 15mm and ASM is 20mm thick. Spoon has recessed/enlarged holes for the Spoon rigid bushing kit at the top and a raised collar at the bottom. The raised collar design limits movement of the steering rack.

 

what's the difference except the keyhole? looks the same as my old one

 

It's been reinforced to support a wing.

 

ASM Rear Lower Bar GT - ASM-AP100238





ASM GT Front Ladder Bar - ASM-AP100210

 

https://www.ebay.com/itm/Rare-JDM-10...texCHc&vxp=mtr

Looks like an ASM Dry Carbon IS11 front bumper+front fenders.