Alejandro
I just checked my email....that reply somehow was sent to my spam box...so I just didn't see it. Usually when one of my customers spends $1600 and has a concern they call me(multiple times).
Keep in mind.....if we weren't so busy, that would probably reflect the fact that we did not do really good work.

 

I gotta agree with Casey, the job was rushed, and it was alot of work for us to get done. First of all you didn't have the keys and suggested we break into your ignition. Not to mention the first EMS was broken. We spent quite a good amount of time trying to get that resolved with AEM, but you insisted on buying another one which was ok, but you REALLY wanted the car back ASAP for a track event so we got it to you when you demanded it be ready to go. the tune was good i was there and saw everything. You yourself have the dyno sheet with a/f chart to see and we can show you anything you need to see with the tune as AEM saves every file we datalog.

I'm not hating on anyone here, i just want everyone to hear both sides of the story. Casey tended to his needs when he got back from tuning cars in other states and talked to Alejandro for quite some time while he was at Laguna.

/off topic

 

Old thread, but had a lot of good info so i decided to bring it back.


how many of you guys with ITBS are running it on an AP2?

 

Great thread

 

^^^^^^ anyone done this to a AP2 (DBW) or not possible yet???

 

possible but you would have to convert to throttle cable. unless someone can come out with a dbw compatible kit then for now this is the only way.

 

we had to cannibalize the TPS from the honda throttle body (not an easy task, they are ordered as one part) to put on my ITB's, I don't see it being much harder taking the DBW actuator and TPS and mounting them directly to the throttle linkage...sure some fabrication would be needed, but it couldn't possibly be that hard...it's an electric motor and a potentiometer...

 

Just found this link in the modifications and parts forum

http://www.obxracingsports.com/products.php?pk=1456

I guess this company makes ITB's now.. take notice of the price.. kinda suspect on quality etc.. so whos gonna be the first??

 

anyone have a dyno of TODA itb on a ap1 or ap2? anything?

 

milkbubble, look at the poor quality on that set. The flimsy little flange and linkage. Im not sure too sure about that piece it looks cheezy.