summitrider2012

Installed!

used these to secure it (bolt in picture wasn’t long enough so I had to get a longer one though



I installed the bracket and spacer then drilled the hole slightly to mark the center then removed the bracket and spacer then drilled it just big enough where I had to hammer the nut sert in and then made a tool to collapse the nut sert then installed everything.

9KEVERYDAY

Nice!! Could you tell a difference?

summitrider2012

Ill be at Palmer this weekend I’ll let you know after.

Singh_snisen

replace the bushings for solid ones and the feel is way better than that brace will provide.

Fokker

Nice job. The base model and the CR have different part numbers for the front subframe.

Base: 50200-S2A-G01
CR: 50200-S2A-A00

summitrider2012

So so I personally didn’t notice a difference but I bought them so I may as well use them as designed and for the $15 in hardware and maybe a half hour to do I figured why not.