jtranizzle

Hey guys, a friend of mine gave me his complete Lucid Automotive rear panel speaker set up. The instructions are very clean and cut, however the harness they include is for Kenwood Excelon series head units. I have a Pioneer.

Picture of my Pioneer harness:

Picture of the included harness:

(H) is the part that attaches to Honda connector.
(P) is the part that attaches to Pioneer head unit.
(Excelon) is the part that attaches to Kenwood head units.
( C) is the wires from included harness that attaches to the rear speaker harness (also included, but not pictured).
The purple/green wires on both pictures are the REAR LEFT and REAR RIGHT.

Can I cut the wires from (C) and solder them to (A) ?? Or will I have to somehow connect (A) to (C) to (B)?
If it sounds unclear, what I'm trying to do is use the rear speaker system on my existing Pioneer head unit. Thanks!

jtranizzle

LOL so I solved the problem. For any future reference this is what I did:

I took the purple/purple-black on (C) and soldered it 3-way with purple/purple-black on (A) and (B). Did this 3-way solder for each color, purple/purple-black/green/green-black.

A bit messy behind the headunit, but I have rear speakers now