Advice Needed :) Do I need the following
Moderator
Joined: Oct 2000
Posts: 30,809
Likes: 15
From: Sydney
The Comptech FPR's only adjustment is it's static pressure. You cannot adjust the ramp ration without changing diaphragms (same as Vortech FMU).
A Comptech FPR with the vacuum line disconnected is not a 1:1 FPR. It will stay at the static rate set regardless of manifold pressure.
A Comptech FPR with the vacuum line disconnected is not a 1:1 FPR. It will stay at the static rate set regardless of manifold pressure.
Thread Starter
Registered User
Joined: Aug 2002
Posts: 2,554
Likes: 0
From: Orlando, Florida
Thanks for all the advice guys 
I bit the bullet today and ordered a AEM FPR and a 3bar map sensor so I should be good to go! I guess I gotta polish my fuel rail now to make it all pretty for the new Red AEM unit
I bit the bullet today and ordered a AEM FPR and a 3bar map sensor so I should be good to go! I guess I gotta polish my fuel rail now to make it all pretty for the new Red AEM unit
Thread
Thread Starter
Forum
Replies
Last Post