EVAP removal?
I didn't get to it tonight b/c of getting most of the accessories back on, but I did get a chance to remove the crap in the engine bay. I'll work on getting the junk around the tank gone soon enough.
Yeah I was kind of wondering this same sort of question when I was doing the wire tuck. There is some sort EVAP solenoid that T's off the vacuum line near the ABS unit. I was curious if the AEM doesnt control the solenoid anymore if this could be a possible boost leak? Or how boost on the EVAP system behaves? I know the valve that feeds the air pump leaks exhaust like a SOB essentially acting as another wastegate.
Here is a picture of the crap I removed. Still 2 tubes that come from the fill-up tube/tank I haven't delt with.
Good bit of junk.
The canister has a little weight to it surpassingly enough.
Good bit of junk.
The canister has a little weight to it surpassingly enough.
Originally Posted by neeman77,Jan 30 2011, 09:11 PM
Yes I was quite surprised about how much that canister actually weighed, good work!
I think they are drains for water I am not sure what part specifically I left them open to atmosphere. I looked them up in the manual at one point. Can you take a pic to make sure you are talking about the hose I am thinking of?
Heres a useful thread:
https://www.s2ki.com/forums/index.php?showt...&#entry17206445
Heres a useful thread:
https://www.s2ki.com/forums/index.php?showt...&#entry17206445
Originally Posted by neeman77,Jan 30 2011, 09:24 PM
I think they are drains for water I am not sure what part specifically I left them open to atmosphere. I looked them up in the manual at one point. Can you take a pic to make sure you are talking about the hose I am thinking of?
Heres a useful thread:
https://www.s2ki.com/forums/index.php?showt...&#entry17206445
Heres a useful thread:
https://www.s2ki.com/forums/index.php?showt...&#entry17206445
These are the hoses I'm talking about.
Blue and yellow.

There is a small vac line that most come off the tank directly b/c it has a hefty fuel smell to it.
The other hard lines go to the fuel feed and return, I didn't bother them, these lines were all connected to the canister or solenoids at one point.


