redboost what are u using to control the cbr coils, m&w box?

 

Yeah. Pro-drag 4

 

I know the AEM stuff is good for 1200+ (and over 100 passes now with ZERO issues) and is probably the cheapest solution out there. Win-win!!

 

Carey whats needed to run the aem smart coils?

 

Wiring. No external box needed.

You'll need to make plug wires, and mount the coils.

What EMS are you running?

 

What year CBR1000 coils? How are they wired in? What's the dwell time etc?

 

Back from the dead but I just picked up some OEM GM 6.0 LS Truck coils out of a 3500 express van. my intention is now to make a valve cover mount on the exhaust side like Carey has. The two questions I have are..,

1. anyone have a wiring diagram how to change the s2000 3 wire coil plugs into the GM LS Truck coil plug?

2. What plug wires do I need?

 

Question on the 12 and up cbr1000 coils are they plug and play? I'm getting breakup above 17 psi or 8k rpm stock coils have 90k on them and it only happens when it cold out or my iat's drop below 60f . seeing as how I am at 450 whp and working on multiport meth kit I think I will need some extra capacitance in the spark voltage area any info would be great .

 

What is your plug gap at?

 

A bit over 700hp on almost 30psi I'm using brand new oem 2005 s2000 coils and ngk 8s gapped at .24 I believe with no issues on e85