Just a FYI in regards to Tial Wastegate springs
#1
![](https://staticssl.ibsrv.net/autocomm/Content/S2Ki/milestonestars-10yr.png)
Thread Starter
![Angry](https://www.s2ki.com/forums/images/icons/icon8.gif)
I had ordered the Tial 38mm MVS Wastegate and orginally I wanted 11.60 psi which is the MVS Copper/Brown spring combo, well If I took out the large Copper spring I would have been left with apprx 4.xx psi which is obviously too low. I looked online and could not find a PSI for just the large Copper spring, well you would think 11.60 minus 4.xx would give you the apprx PSI of the Copper Spring, well guess what...............
it does
, the Copper Spring for the MVS is 7.xx psi, I just figured I would share becaue I had to call Tial, I could not find it on any of their Spring/PSI charts......
just figured I would share in case anyone was looking at a Copper spring and didnt know what PSI it was........
it does
![smile.gif](https://www.s2ki.com/forums/images/smilies/smile.gif)
just figured I would share in case anyone was looking at a Copper spring and didnt know what PSI it was........
Thread
Thread Starter
Forum
Replies
Last Post