Vortech Reliability
Joined: Sep 2008
Posts: 1,126
Likes: 7
From: Bay Area, CA
V3 SI - http://www.vortechsuperchargers.com/page.php?id=30148
V3 SCi - http://www.vortechsuperchargers.com/page.php?id=30147
Joined: Sep 2008
Posts: 1,126
Likes: 7
From: Bay Area, CA
Okay, I just looked at the kits on the Vortech site and do not see the Si as a default option. Maybe the original buyer opted for the Si trim just like the one below.
https://www.s2ki.com/s2000/topic/800...ood-for-775hp/
My point was that that the SCi = 1220. The 1220 would max out at ~12psi or ~400whp with the smallest pulley.
OP: It will probably say the model number on the blower name plate.
https://www.s2ki.com/s2000/topic/800...ood-for-775hp/
My point was that that the SCi = 1220. The 1220 would max out at ~12psi or ~400whp with the smallest pulley.
OP: It will probably say the model number on the blower name plate.
Thread Starter
Registered User
Joined: Jan 2014
Posts: 5
Likes: 0
Okay, I just looked at the kits on the Vortech site and do not see the Si as a default option. Maybe the original buyer opted for the Si trim just like the one below.
https://www.s2ki.com/s2000/topic/800...ood-for-775hp/
My point was that that the SCi = 1220. The 1220 would max out at ~12psi or ~400whp with the smallest pulley.
OP: It will probably say the model number on the blower name plate.
https://www.s2ki.com/s2000/topic/800...ood-for-775hp/
My point was that that the SCi = 1220. The 1220 would max out at ~12psi or ~400whp with the smallest pulley.
OP: It will probably say the model number on the blower name plate.
Thread
Thread Starter
Forum
Replies
Last Post
Moddiction
S2000 Forced Induction
12
Apr 27, 2013 07:53 AM