overheating on track
Registered User
Joined: Jul 2009
Posts: 1,024
Likes: 1
So does pressure.
http://www.engineeringtoolbox.com/bo...ter-d_926.html
A 1.1bar cap would put the boiling point of pure water around 250*F.
...
On the other hand, you would need approximately 75% antifreeze to do that:
http://www.engineeringtoolbox.com/bo...ter-d_926.html
A 1.1bar cap would put the boiling point of pure water around 250*F.
...
On the other hand, you would need approximately 75% antifreeze to do that:
Registered User
Joined: Jun 2011
Posts: 1,786
Likes: 2
From: Norwich
Originally Posted by mattie170' timestamp='1408312196' post='23290696
I had a twin pass rad made in the uk and it sorted all my track temps. I see a max of 93c then once the fans start it pulls it down to 87-88c then keeps doing that cycle. Oil gets to 110c for reference. This is while doing about a 20 minute track session.
What power were you making?
What's an airco?
Thread Starter
Joined: Mar 2005
Posts: 666
Likes: 2
From: Holland
Originally Posted by YuriArts' timestamp='1408385817' post='23291878
[quote name='mattie170' timestamp='1408312196' post='23290696']
I had a twin pass rad made in the uk and it sorted all my track temps. I see a max of 93c then once the fans start it pulls it down to 87-88c then keeps doing that cycle. Oil gets to 110c for reference. This is while doing about a 20 minute track session.
I had a twin pass rad made in the uk and it sorted all my track temps. I see a max of 93c then once the fans start it pulls it down to 87-88c then keeps doing that cycle. Oil gets to 110c for reference. This is while doing about a 20 minute track session.
What power were you making?
What's an airco?
[/quote]
Airconditioning.
Registered User
Joined: May 2006
Posts: 441
Likes: 0
From: Anderson, S.C.
Thanks for the advise, really good pointers here.
I already contacted Ian (Mrsideways), he is going to make a radiator/fan setup for me.
Most of the parts in the bay are heatwrapped, hood is vented, turbo just got a new blanket today.
I may drop the airco if this doesn't help enough. First going to see what the new radiator does.
I already contacted Ian (Mrsideways), he is going to make a radiator/fan setup for me.
Most of the parts in the bay are heatwrapped, hood is vented, turbo just got a new blanket today.
I may drop the airco if this doesn't help enough. First going to see what the new radiator does.
Thread
Thread Starter
Forum
Replies
Last Post
boyguan
S2000 Under The Hood
7
Jan 30, 2014 10:17 AM