S2000 Talk Discussions related to the S2000, its ownership and enthusiasm for it.

Break lose upon VTEC?

Thread Tools
 
Old Jan 23, 2009 | 06:02 AM
  #31  
wdrx02's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 221
Likes: 0
Default

I went and purchased a pair of Sumitomo HTR Z III on tirerack for like $212 shipped. (read some reviews, good bang for the buck and daily obviously will be better than what I have right now).

I realize my front is going bald too so I will have to change those as well but getting rear first since RWD, scary with no traction. can drive but have to be careful on the rpm rang eand throttle.
Reply
Old Jan 23, 2009 | 06:59 AM
  #32  
s2kobsession's Avatar
 
Joined: Apr 2007
Posts: 5,874
Likes: 1
From: Lower Mainland
Default

just be careful of understeer now that you have those new tires on the rear. I would replace the fronts with the same model and drive very carefully until you do.
Reply
Old Jan 23, 2009 | 11:48 AM
  #33  
wdrx02's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 221
Likes: 0
Thumbs down

[quote name='s2kobsession' date='Jan 23 2009, 07:59 AM'] just be careful of understeer now that you have those new tires on the rear.
Reply
Old Jan 23, 2009 | 07:23 PM
  #34  
Ks320's Avatar
Registered User
Gold Member (Premium)
 
Joined: May 2005
Posts: 5,252
Likes: 1
From: Hong Kong
Default

Originally Posted by hirev' date='Jan 22 2009, 12:37 PM
if you are new to your s2000, they do that, the weight is centered so that when you are mid turn and you goose it the rear begins to spin out...just give it gas gradually when in a turn and then power out just as your rear is through the apex. sure balding tires will do it too and wet weather and cold, but power applied at the wrong time will spin...
the OP is talking about accelerating in a straight line
Reply
Old Jan 23, 2009 | 10:28 PM
  #35  
wdrx02's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 221
Likes: 0
Default

Torque Steer basically...
Too much force with poor tire conditions, basically result in lost of traction.
Being RWD.... thats where it goes...
Reply
Old Jan 28, 2009 | 12:06 PM
  #36  
wdrx02's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 221
Likes: 0
Default

Since this car is freshly aligned from dealer (non-honda dealer) and the fact I am replacing the rear tires (only tires in OEM SPEC).

Would I still need to do alignment or it would be safe to say, no need to spend the money yet.

I do plan to change the front tires but not yet and was wondering if an alignment is neccessary just for a rear tire change. If not, this would be saving me the money and time to have to do two alignments.
Reply
Old Jan 28, 2009 | 12:16 PM
  #37  
jasonw's Avatar
Registered User
 
Joined: Mar 2005
Posts: 16,702
Likes: 0
From: █ SF, CA █
Default

no
Reply
Old Jan 28, 2009 | 01:46 PM
  #38  
wdrx02's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 221
Likes: 0
Thumbs down

Originally Posted by jasonw' date='Jan 28 2009, 01:16 PM
no
Sorry, but no to, no need for alignment or yes?

Usually I would say no but I wanted to be sure that the S2k didn't have some sensitive or requirment. This is my first time owning a RWD and specially a AP2
Reply
Old Jan 28, 2009 | 01:57 PM
  #39  
ans2k's Avatar
Registered User
 
Joined: May 2008
Posts: 5,177
Likes: 1
Default

humm, i have an ap2 with bfg' g-force kdw-2 with about 30% tread left and it is 30 degrees F, and wet, i also have and intake, exhaust and headers but my car doesn't break loose when i step on the gas?
Reply
Old Jan 28, 2009 | 03:04 PM
  #40  
jasonw's Avatar
Registered User
 
Joined: Mar 2005
Posts: 16,702
Likes: 0
From: █ SF, CA █
Default

Originally Posted by wdrx02' date='Jan 28 2009, 02:46 PM
Sorry, but no to, no need for alignment or yes?

Usually I would say no but I wanted to be sure that the S2k didn't have some sensitive or requirment. This is my first time owning a RWD and specially a AP2
No need for another alignment.
Reply



All times are GMT -8. The time now is 05:46 PM.