Idle Re-Learn After Throttle Body Service?
10-21-2009, 05:00 PM
#1
Registered User
Thread Starter
Join Date: Jul 2008
Posts: 1,692
Likes: 0
Received 0 Likes
on
0 Posts
Idle Re-Learn After Throttle Body Service?
hey, my buddy wants to preform a throttle body service. He works at Nissan and all of the cars that he has preformed this on need to have an idle air control re-learn before the car operates properly. The system that he is using is a Nissan based system however can be used on other makes and models. He is just not sure if he will have to do the re learn after the service is complete. Now he knows that all of the Nissans he does this to have a ETB (electronic throttle body) and his s2k has a cable operated one. Just curious.
10-22-2009, 03:49 AM
#4
There is a gerneric Honda idle relearn. I don't remember the process but its something like;
-write down radio codes
-unplug pos battery terminal wait 30 sec - 1min
-plug back and and start car
-let idle until operating temp. and let rad fan come on twice
(I think you might even have to hold it at 2000rpm somewhere in that process)
Danio would have access to this tho via i-drive or what ever they call it these days...
-write down radio codes
-unplug pos battery terminal wait 30 sec - 1min
-plug back and and start car
-let idle until operating temp. and let rad fan come on twice
(I think you might even have to hold it at 2000rpm somewhere in that process)
Danio would have access to this tho via i-drive or what ever they call it these days...
10-22-2009, 08:14 AM
#5
Registered User
Join Date: Sep 2008
Location: York Region
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by deanob,Oct 22 2009, 03:49 AM
There is a gerneric Honda idle relearn. I don't remember the process but its something like;
-write down radio codes
-unplug pos battery terminal wait 30 sec - 1min
-plug back and and start car
-let idle until operating temp. and let rad fan come on twice
(I think you might even have to hold it at 2000rpm somewhere in that process)
Danio would have access to this tho via i-drive or what ever they call it these days...
-write down radio codes
-unplug pos battery terminal wait 30 sec - 1min
-plug back and and start car
-let idle until operating temp. and let rad fan come on twice
(I think you might even have to hold it at 2000rpm somewhere in that process)
Danio would have access to this tho via i-drive or what ever they call it these days...
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post