2016 Track Junkie Thread!
https://performanceparts.ford.com/part/M-6007-20T
$8k, that isnt horrible. But what else would you need
Are you using an aftermatket ecu?
Originally Posted by iridedumped' timestamp='1464918271' post='23983466
If your familiar with the b series setups mine feels like a LS motor on a b16 transmission. It's pretty rough.
Thanks for the input.
Originally Posted by metros' timestamp='1465089940' post='23985017
Most builders use the ej205/ej257. Although you can fit them with the Focus ST engine as well. But be ready to spend for that.
Thanks!
Thanks!
https://performanceparts.ford.com/part/M-6007-20T
$8k, that isnt horrible. But what else would you need
Are you using an aftermatket ecu?
For reference: My donor vehicle cost $7750 and I sold enough off the donor that I didn't need to really only be in it for $1k. Of course, those savings were all poured back into the project in the form of suspension upgrades, Blouch 18g turbo, seats/harnesses, etc. But the cost differences between a donor build and purchasing the Ford engine to start with are significant.
I'm using an accessport. So stock ecu with reflash from Cobb.
Fixed for accuracy.









