When connecting the tweeters from an aftermarket component set, how have you guys installed them?

1.) Soldering the stock harness to the tweeter
2.) Crimp-cap the stock harness to the tweeter

I tried the soldering method, and the speaker has just today started cutting in and out.

All suggestions are appreciated!

 

uhh neither.

connected them to the component set xover.

 

Okay...then where do I run the speaker wire to from the input of the crossover?

I'm not running a separate amp...I'm trying to drive the speakers through the head unit.

 

from the head unit/woofer harness... I ran new wires straight from the HU myself..