S2000 Forced Induction S2000 Turbocharging and S2000 supercharging, for that extra kick.

Idle timing and general timing questions

Thread Tools
 
Old Jul 31, 2013 | 08:38 AM
  #11  
camuman's Avatar
20 Year Member
 
Joined: Oct 2002
Posts: 8,044
Likes: 6
From: South Florida
Default

Originally Posted by s2knoob89
Thread from an Evo forum http://forums.evolutionm.net/aem-ems...e-aem-ecu.html

This is how I have mine setup. Before my car would try to stall sometimes when the fans kicked on. This fixed it 100%

that is a very indepth review of how to make your car idle well. shows how all the different factors play into idle also. most dont understand all the stuff involved to make the car start cold, idle down and run right at idle. that being the case, mine idles fine with 0% tps. well, i have one very small issue, but its to do with the iacv and me not tuning that from 700 all the way up to like 1800. so once in a blue mooon i get a idle blip up and down like its stuck in a loop from 1000-1500ishrpm. but a blip of the throttle fixes it and it drops back down to 900.

mine idles like a champ at 900rpm. ac kicks on its fine, ac kicks off and fine. fans are always on so no worries there lol. but for anyone having idle issues, this is a great diy to follow. most tuners dont mess with this from my experience.
Reply
Old Jul 31, 2013 | 12:03 PM
  #12  
GrandMasterKhan's Avatar
15 Year Member
Photogenic
Photoriffic
 
Joined: Jun 2006
Posts: 5,149
Likes: 17
From: Raleigh, NC
Default

yeah mine idles like shit. Gotta get some more tuning done. hot start up is no good either.
Reply
Old Jul 31, 2013 | 12:18 PM
  #13  
siadam's Avatar
Registered User
 
Joined: May 2008
Posts: 3,791
Likes: 1
From: Around
Default

Originally Posted by 5thgen
I have the battery offset tables set to the default settings for my injectors (id1000). I have not actually disconnected the alternator to tune the offset tae though. I will have to log the battery voltage to see if that is the actual issue.

Where is that located?
Reply
Old Jul 31, 2013 | 01:42 PM
  #14  
5thgen's Avatar
Thread Starter
15 Year Member
Liked
 
Joined: Sep 2009
Posts: 460
Likes: 90
Default

It is in fuel "trims".

You can also set the injector (though you can't modify it from here) by going to:

Wizards > Setup wizard > Primary injectors
Reply
Old Jul 31, 2013 | 03:30 PM
  #15  
spectacle's Avatar
20 Year Member
 
Joined: Sep 2004
Posts: 4,894
Likes: 9
From: Tampa, FL
Default

here's a complete how-to video:

http://www.youtube.com/watch?v=4CfP-W5bu5c
Reply
Old Aug 1, 2013 | 07:40 AM
  #16  
siadam's Avatar
Registered User
 
Joined: May 2008
Posts: 3,791
Likes: 1
From: Around
Default

Originally Posted by 5thgen
It is in fuel "trims".

You can also set the injector (though you can't modify it from here) by going to:

Wizards > Setup wizard > Primary injectors

Oh ok, I thought there was another offset table you were referring to. Sorry, my misunderstanding.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
amdaman
S2000 Forced Induction
12
Jun 11, 2015 08:34 PM
MPS2000
S2000 Forced Induction
10
Sep 14, 2012 10:03 AM
Phill24
S2000 Forced Induction
7
Mar 12, 2012 03:15 PM
lotus7racer
S2000 Engine Management
1
May 25, 2010 06:03 PM
f20kills
S2000 Forced Induction
11
Aug 11, 2005 02:43 AM




All times are GMT -8. The time now is 11:59 PM.