Tag: Engine

Over-revving experience: DIY Engine Inspection and Test

Original DIY write-up by chilicoke This thread is intended to document my experience of a mechanical over-rev on my F22C (07, AP2v2) and the inspections/tests I have done to check for signs of damage as well as the condition of the engine. The procedures I’m going through below are what I had learned with information […] More »

  Comments | By - August 3, 2010

DIY Removal and Installation of Passenger’s Motor Mount

Original DIY write-up by ans2k I recently split my passenger motor mount. I notice that there isn’t a “DIY” in the sticky. So I put together my own. Do this when the car is cool, because the header is extremely hot!! If your motor mount looks like this and you have some crazy vibrations in […] More »

  Comments | By - July 27, 2010

Classic roadster, modern heart!

Over the ten years we’ve been blessed with the S2000, we’ve seen many crazy S2000 setups, from your “standard” forced induction S2000s to some interesting engine swaps, including the Supra 2JZ into our beloved roadster or an F20C into an old Datsun 510. Either F20C or F22C powered, our engine is a convenient solution for […] More »

  Comments | By - June 29, 2010

S2000 Engine Bay Detailing Tips

This time we shall take you deeply into the world of detailing and more specific we will share with you the art of detailing since our fellow S2000 owner, krshultz, has done an incredible work in his engine bay. Honestly, there is no question about this. I mean, how many times have you opened the […] More »

  Comments | By - February 26, 2010

Honda S2000 with a 5.3 liter V8 engine is reborn as the S5300

Few days ago you all read about the Honda S2000 CR that is being equipped with Acura’s 3.7 liter V6 engine. Today a new S2000 owner s5300ks made his introduction at S2KI community, with an even more interesting engine bay. Under the hood of his 2000 Honda S2000, a 5.3 liter V8 engine with heads […] More »

  Comments | By - December 23, 2009

  1. 1
  2. 2
  3. 3