steering problem....
#101
Anyone know why the light would come on after a coolant change?
I put out the car up on jack stands, changed the coolant and the light came on just as I bled the last of the air out. I've see some post about possibly having low voltage? Long idles without driving? And I've even seen a post that stated the light would come on if the car is running and there was no steering input. Anyone have any issues like this?
2007 AP2
I put out the car up on jack stands, changed the coolant and the light came on just as I bled the last of the air out. I've see some post about possibly having low voltage? Long idles without driving? And I've even seen a post that stated the light would come on if the car is running and there was no steering input. Anyone have any issues like this?
2007 AP2
#102
Thanks for the solution!
Sorry to open an old post but I NEED to say thank you for your research and advice!
My power steering was have the same “hard moments” during low speed turning and a little shake at high speed sometimes. I was ready to spend hundreds on parts when I stumbled across this thread sudgesting i grease the ts.. it’s worked like a charm! All of my steering issues are gone! Thanks guys!
My power steering was have the same “hard moments” during low speed turning and a little shake at high speed sometimes. I was ready to spend hundreds on parts when I stumbled across this thread sudgesting i grease the ts.. it’s worked like a charm! All of my steering issues are gone! Thanks guys!
#103
Registered User
That is Fantastic Fernando... It's a weird issue and it may come and go with cooler outside air temps. Let us know if the issue comes back... Thanks for posting your results..
Thread
Thread Starter
Forum
Replies
Last Post